回收Agilent N9912A FieldFox 射频分析仪丨N9912A手持频谱分析仪

Agilent N9912A回收、Keysight频谱仪N9912A
品牌:Agilent(安捷伦)
型号:Agilent N9912A射频分析仪

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
肖晓:13377777186(微信同号)

李生 :13790101018(微信同号)

QQ: 2441688423
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

特性:
.传输/反射(S21、S11)或全 2 端口(S21、S11、S12、S22)
.时域选通电缆和天线分析仪(CAT)、矢量电压表(VVM)
.N9912A频率2 MHz 至 4/6 GHz方向性 > 42 dB
.CAT:故障点距离、回波损耗、电缆损耗
.射频源:2 MHz 至 4/6 GHz、连续波和跟踪功能
.通过 USB 传感器进行功率测量,9 kHz 至 24 GHz
.Agilent N9912A射频分析仪频率2 MHz 至 4/6 GHz
.DANL:-148 dB,+18 dBm TOI(Agilent N9912A)
.独立信号源、矢量电压表(VVM)、功率测量
.CAT:故障点距离、回波损耗、电缆损耗
.VVM:可比较相位长度和电气长度、电缆整修、HP 8508A 功能
.方向性 > 42 dB,校准,全2端口校准,动态范围> 100 dB

They grinned at each other, and flashes of numerous accidentsalways in someway connected to Bellaflashed through Mike’s head.

　　Mike played alone at first, while Bella hesitated on the back half of the court,holding her racket gingerly, as if it was some kind of weapon. Then Coach Clapp

ambledby and ordered Mike to let Bella play.

　　  Uh oh, Mike thought as Bella moved forward with a sigh, holding her racquet atan awkward angle.

　　Jennifer Ford served the birdie directly toward Bella with a smug twist to herthoughts. Mike saw Bella lurch toward it, swinging the racket yards wide of her

target,and he rushed in to try to save the volley.

　　I watched the trajectory of Bella’s racquet with alarm. Sure enough, it hit the tautnet and sprung back at her, clipping her forehead before it spun out to strike

Mike’s armwith a resounding thwack.

　　Ow. Ow. Ungh. That’s going to leave a bruise.

　　Bella was kneading her forehead. It was hard to stay in my seat where I belonged,knowing she was hurt. But what could I do, if I were there And it didn’t seem to

beserious… I hesitated, watching. If she intended to continue to try to play, I was going tohave to manufacture an excuse to pull her out of class.

商品描述:
N9912A 是一款使用电池供电的便携式射频分析仪,其中包括电缆和天线测试仪、故障点距离测试仪、频谱分析仪、功率计、1 通道矢量电压表以及传输/反射矢量网络分析仪。

校准:
·QuickCal(校准)支持在不使用校准套件条件下校准 FieldFox
·CalReady(校准就绪)可确保设备在开机后立即展开测试
·使用自动插入法的宽带校准可以避免在测试频率或测试点数量改变后的重新校准步骤